My Cart: 0 item(s)
SDS Sheets and Safety Information
CALL US TO DISCUSS SHIPPING OPTIONS ( 2 or more drums best shipping Discount )
Thumbnail Filmstrip of National Chemical 0510-18 One Coat 25 Floor Finish Super Gloss Images
Description
National Chemical Laboratories 0510-18 One Coat 25 Floor Finish Super High Gloss
A high gloss — high solids pure thermoplastic floor finish which is extremely durable and can be maintained with conventional or high speed floor care systems. This pure acrylic floor finish is produced in high pressure reactors using proprietary molecularly engineered polymers, the finest high pressure micronized wax emulsion, preservatives, leveling aids, interacted plasticizers and deionized water to offer a premium grade floor finish.
Authorized UL Product
Directions
Floor Preparation: Strip
old finish and wax using your preferred NCL floor stripper following label
directions. For baseboards and corners, use an NCL baseboard stripper following
label directions. If necessary, rinse thoroughly with clean water and allow to
completely dry.
Application: Using
a clean mop or applicator apply a thin uniform coats of ONE COAT 25™ Hi-Gloss
Floor Finish. Allow to dry for a minimum of 30 minutes after each coat. Do not
apply more than 4 coats in a 24 hour period. Floor should be thoroughly dry
before traffic is allowed in area.
High Speed Buffing and Burnishing: ONE
COAT 25™ Hi-Gloss Floor Finish is an ideal product for use with high speed
polishing or burnishing machines of 1000 rpm or higher. Prior to buffing or
burnishing dust mop the floor surface using an NCL dust mop treatment. Buff or
dry burnish using an approved buffing pad. For spray buffing, mop-on or
autoscubber restoring use a preferred NCL gloss restorer.
Routine Maintenance: Dust
mop using mop treated with an NCL dust mop treatment. Damp mop or clean with an
automatic scrubber using your preferred NCL neutral floor cleaner following
label directions.
Features & Benefits
- High solids formula / Offers labor and material savings by limiting the number of wear coats which must be applied
- Pure thermoplastic polymers / Responsive to high speed burnishing
- May be used with conventional or high speed floor maintenance systems / Allows versatility and reduced inventory levels of additional products
- Very hard wear surface / Extremely scratch and scuff resistant
- Designed for ease of application / May be applied by any personnel without extensive training