My Cart: 0 item(s)
SDS Sheets and Safety Information
CALL US TO DISCUSS SHIPPING OPTIONS ( 2 or more drums best shipping Discount )
Thumbnail Filmstrip of National Chemical 0591-18 Withstand Non Buff Floor Sealer/Finish 55 gal Drum Images
Description
National Chemical 1591-18 Withstand Non Buff Floor Sealer/Finish
Description
This superior sealer / finish is ideal for areas which receive little to no polishing or buffing. Utilizing MPS77 Advanced Technology, WITHSTAND™ provides a dramatic wet-look gloss from fewer coats, with long term gloss retention. Easy to apply; reduces labor costs. Classified by Underwriters Laboratories® for slip resistance.
Authorized UL Product
Directions
Floor Preparation: Strip
old finish and wax using your preferred NCL floor stripper following label
directions. For baseboards and corners, use an NCL baseboard stripper following
label directions. If necessary, rinse thoroughly with clean water and allow to
completely dry.
Application: Using
a clean mop or applicator apply a thin uniform coats of WITHSTAND™ Non-Buff
Floor Sealer / Finish. Allow to dry for a minimum of 20 minutes after each coat.
Do not apply more than 4 coats in a 24 hour period. Floor should be thoroughly
dry before traffic is allowed in area.
High Speed Buffing and Burnishing (if desired): WITHSTAND™
Non-Buff Floor Sealer / Finish is an ideal product for use in areas where
minimal or no buffing maintenance can be performed. You may, if desired,
maintain this product with High Speed polishing or UHS burnishing equipment
(electric, battery or propane). Conventional speed maintenance is not
recommended. Prior to buffing or burnishing, dust mop the floor surface. Buff or
dry burnish using an approved buffing pad. For spray buffing, mop-on or
autoscubber restoring use a preferred NCL gloss restorer.
Routine Maintenance: Dust
mop area to collect dirt and debris. Damp mop or clean with an automatic
scrubber using your preferred NCL neutral floor cleaner following label
directions.
Features & Benefits
- High Traffic Applicable
- Exceptional wear and durability
- Combination Sealer/Finish reduces product cost
- Maximum scuff and scratch resistance
- Reduces labor costs associated with buffing maintenance