SKU: 421200
Quat Test Strips Each Roll 15 ft 6 rolls pack 421200

Description

Use to test Multi-Clean MC-10 Sanitizer solution

Quat Sanitizer Test Strips (0-400 PPM ) provides a simple, reliable, and economical means to measure the concentration of Quaternary Sanitizers, including n-alkyldimethylbenzyl and/or n-alkyl dimethyl ethyl benzyl ammonium chloride, and Rocall II. With color matches at 0-100-200-300-400ppm (parts per million), the test paper measures concentrations between 0-400ppm, detecting exhaustion of solutions that should be replaced as well as helping to avoid using excessive amounts of sanitizing agents. Federal, State and Local health regulations require users of Quaternary Ammonium Sanitizer Solutions to have appropriate test kits available to verify the strength of sanitizer solutions. Sanitizer solutions are essential in the food service industry to ensure that sanitizers are at the proper concentration specified by the individual manufacturer. Each kit consists of a 15-foot roll of test paper and matching color chart. Directions: Dip the strip into the sanitizing solution for 10 seconds, then instantly compare the resulting color with the enclosed color chart which matches concentrations of 0-100-200-300-400ppm. Test solution should be between 65 and 75 degrees Fahrenheit. Contact your Local, State or Federal Health Department for Quaternary Ammonium Sanitizer concentration requirements. These concentrations may vary depending on your specific application.

Testing Instructions:

 1. Tear off a strip about 1 to 2 inches in length. 2. Dip the strip into the sanitizing solution for 10 seconds, then instantly match the resulting color with the color chart on the package to determine the concentration.. 3. The test solution should be between 65 and 75 degrees Fahrenheit. 4. The minimum reading of properly diluted Multi-Clean M-C 10 Sanitizer Solution is 200 ppm. Acceptable Range: 200-400 ppm. 5. If reading is below 200 ppm, prepare a fresh sanitizer solution.